msgid ""
msgstr ""
"Project-Id-Version: DriverInstall_en_US\n"
"POT-Creation-Date: 2015-12-08 14:34+0800\n"
"PO-Revision-Date: 2015-12-17 18:38+0800\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en_US\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.7.5\n"
"X-Poedit-Basepath: E:\\WorkCode\\RongTaPrinterTool\\RongtaPrinter"
"\\RongtaPrinterTool\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-KeywordsList: getPoTextW\n"
"X-Poedit-SearchPath-0: MainDlg.h\n"
"X-Poedit-SearchPath-1: MainDlg.cpp\n"
"X-Poedit-SearchPath-2: ParamSetDialog.h\n"
"X-Poedit-SearchPath-3: ParamSetDialog.cpp\n"
"X-Poedit-SearchPath-4: SendUDP.cpp\n"
"X-Poedit-SearchPath-5: SendTcp.cpp\n"
"X-Poedit-SearchPath-6: 2DBARTabDialog.h\n"
"X-Poedit-SearchPath-7: 2DBARTabDialog.cpp\n"
"X-Poedit-SearchPath-8: BaseTabDialog.h\n"
"X-Poedit-SearchPath-9: BaseTabDialog.cpp\n"
"X-Poedit-SearchPath-10: Big5TabDialog.h\n"
"X-Poedit-SearchPath-11: Big5TabDialog.cpp\n"
"X-Poedit-SearchPath-12: BlackMarkTabDialog.h\n"
"X-Poedit-SearchPath-13: BlackMarkTabDialog.cpp\n"
"X-Poedit-SearchPath-14: cmd.h\n"
"X-Poedit-SearchPath-15: cmd.cpp\n"
"X-Poedit-SearchPath-16: Config.h\n"
"X-Poedit-SearchPath-17: Config.cpp\n"
"X-Poedit-SearchPath-18: DownloadDialog.h\n"
"X-Poedit-SearchPath-19: DownloadDialog.cpp\n"
"X-Poedit-SearchPath-20: EthernetDialog.h\n"
"X-Poedit-SearchPath-21: EthernetDialog.cpp\n"
"X-Poedit-SearchPath-22: HotTabDialog.h\n"
"X-Poedit-SearchPath-23: HotTabDialog.cpp\n"
"X-Poedit-SearchPath-24: LogoTabDialog.h\n"
"X-Poedit-SearchPath-25: LogoTabDialog.cpp\n"
"X-Poedit-SearchPath-26: Monitor.h\n"
"X-Poedit-SearchPath-27: Monitor.cpp\n"
"X-Poedit-SearchPath-28: NetTabDialog.h\n"
"X-Poedit-SearchPath-29: NetTabDialog.cpp\n"
"X-Poedit-SearchPath-30: PrinterSetDialog.h\n"
"X-Poedit-SearchPath-31: PrinterSetDialog.cpp\n"
"X-Poedit-SearchPath-32: ProgramTabDialog.h\n"
"X-Poedit-SearchPath-33: ProgramTabDialog.cpp\n"
"X-Poedit-SearchPath-34: RppTabDialog.h\n"
"X-Poedit-SearchPath-35: RppTabDialog.cpp\n"
"X-Poedit-SearchPath-36: SerialTabDialog.h\n"
"X-Poedit-SearchPath-37: SerialTabDialog.cpp\n"
"X-Poedit-SearchPath-38: UDPSearchTabDialog.h\n"
"X-Poedit-SearchPath-39: UDPSearchTabDialog.cpp\n"
"X-Poedit-SearchPath-40: util.h\n"
"X-Poedit-SearchPath-41: util.cpp\n"
"X-Poedit-SearchPath-42: WifiTabDialog.h\n"
"X-Poedit-SearchPath-43: WifiTabDialog.cpp\n"
"X-Poedit-SearchPath-44: GlobalString.h\n"
"X-Poedit-SearchPath-45: LptDialog.cpp\n"
"X-Poedit-SearchPath-46: ParamSetDialog.h\n"
"X-Poedit-SearchPath-47: OtherTabDialog.cpp\n"
"X-Poedit-SearchPath-48: OtherTabDialog.h\n"

#: BlackMarkTabDialog.cpp:67 BlackMarkTabDialog.cpp:75
#: BlackMarkTabDialog.cpp:111 BlackMarkTabDialog.cpp:119
#: BlackMarkTabDialog.cpp:155 BlackMarkTabDialog.cpp:163
#: BlackMarkTabDialog.cpp:199 BlackMarkTabDialog.cpp:207 HotTabDialog.cpp:32
#: HotTabDialog.cpp:40 OtherTabDialog.cpp:32 OtherTabDialog.cpp:40
#: RppTabDialog.cpp:35 RppTabDialog.cpp:43 RppTabDialog.cpp:56
#: RppTabDialog.cpp:64 RppTabDialog.cpp:77 RppTabDialog.cpp:85
#: RppTabDialog.cpp:98 RppTabDialog.cpp:106
msgid "PO_GSTR_BM_NUMBER_ERR"
msgstr "Please input a number"

#: Config.cpp:28 LptDialog.cpp:171
msgid "PO_GSTR_CONFIG_PORT_ERROR"
msgstr "Can't config port"

#: Config.cpp:141 cmd.cpp:273
msgid "PO_GSTR_OPEN_COM_FAIL"
msgstr "Open com fail"

#: Config.cpp:153 Config.cpp:163 cmd.cpp:286
msgid "PO_GSTR_SET_COM_FAIL"
msgstr "Configure com port fail"

#: HotTabDialog.cpp:49 OtherTabDialog.cpp:49
msgid "PO_GSTR_HOTTIME_NUMBER_ERR"
msgstr "You input must be bigger than 300"

#: HotTabDialog.cpp:55 OtherTabDialog.cpp:55
msgid "PO_GSTR_HOTTIME_NUMBER_OVER_ERR"
msgstr "You input must be less than 800"

#: LogoTabDialog.cpp:34
msgid "PO_GSTR_LOGO_LIST_MAX"
msgstr "Can't add log list any more"

#: LogoTabDialog.cpp:129 LogoTabDialog.cpp:536
msgid "PO_GSTR_SELECT_LOGO_ERR"
msgstr "Please select a logo!"

#: LogoTabDialog.cpp:516
msgid "PO_GSTR_DOWNLOAD_LOGO_ERR"
msgstr "Download logo fail"

#: LogoTabDialog.cpp:524 cmd.cpp:296 cmd.cpp:345 cmd.cpp:375
msgid "PO_GSTR_SET_SUCCESS"
msgstr "Set success"

#: LptDialog.cpp:119
msgid "PO_GSTR_CONFIG_LPT"
msgstr "Configure LPT Port"

#: LptDialog.cpp:121
msgid "PO_GSTR_TIMEOUT"
msgstr "Timeout(seconds)"

#: LptDialog.cpp:123
msgid "PO_GSTR_RETRY"
msgstr "Transmission Retry"

#: LptDialog.cpp:125
msgid "PO_GSTR_LPT_OK"
msgstr "OK"

#: LptDialog.cpp:126
msgid "PO_GSTR_LPT_CANCEL"
msgstr "CANCEL"

#: MainDlg.cpp:53 cmd.cpp:279
msgid "PO_GSTR_SET_COM_NEED_CONFIG"
msgstr "You need Configure com port first"

#: MainDlg.cpp:59
msgid "PO_GSTR_SET_ENET_NEED_CONFIG"
msgstr "You need Configure ip first"

#: MainDlg.cpp:119
msgid "PO_GSTR_CANNOT_CONFIG_PORT"
msgstr "The port no configuration"

#: ProgramTabDialog.cpp:33 ProgramTabDialog.cpp:41 ProgramTabDialog.cpp:127
msgid "PO_GSTR_INVALID_FIRMWARE"
msgstr "Invalid Firmware"

#: ProgramTabDialog.cpp:176
msgid "PO_GSTR_UPDATE_FIRMWARE_SUCCESS"
msgstr "Update Firmware success"

#: RppTabDialog.cpp:206
msgid "PO_GSTR_RPP_DEV_NAME_EMPTY_ERR"
msgstr "Please input device name"

#: RppTabDialog.cpp:221
msgid "PO_GSTR_RPP_PIN_EMPTY_ERR"
msgstr "Please input pin"

#: RppTabDialog.cpp:253
msgid "PO_GSTR_RPP_MODEL_NAME_EMPTY_ERR"
msgstr "Please input model name"

#: RppTabDialog.cpp:268
msgid "PO_GSTR_RPP_SERIAL_EMPTY_ERR"
msgstr "Please input serial"

#: UDPSearchTabDialog.cpp:58 UDPSearchTabDialog.cpp:77
#: UDPSearchTabDialog.cpp:90 UDPSearchTabDialog.cpp:120
msgid "PO_GSTR_PARAM_SET_SELECT_PRINTER"
msgstr "Please select a existent printer!"

#: UDPSearchTabDialog.cpp:109 UDPSearchTabDialog.cpp:139
#: ParamSetDialog.h:374
msgid "PO_GSTR_SEND_TCP_DATA_ERROR"
msgstr "Send data to printer fail."

#: WifiTabDialog.cpp:32
msgid "PO_GSTR_WIFI_SSID_EMPTY_ERR"
msgstr "SSID is empty,please input SSID"

#: WifiTabDialog.cpp:58
msgid "PO_GSTR_WIFI_PSKKEY_ERR"
msgstr "PSK key is empty,please input PSK key"

#: WifiTabDialog.cpp:84
msgid "PO_GSTR_WIFI_WEP_KEY_ERR"
msgstr "WEP key is empty,please input WEP key"

#: cmd.cpp:304 cmd.cpp:354 cmd.cpp:380
msgid "PO_GSTR_SET_FAIL"
msgstr "Set fail"

#: cmd.cpp:336
msgid "PO_GSTR_OPEN_LPT_FAIL"
msgstr "Open lpt fail"

#: cmd.cpp:404
msgid "PO_GSTR_OPEN_PRINTER_FAIL"
msgstr "Open printer fail"

#: cmd.cpp:418
msgid "PO_GSTR_START_DOC_FAIL"
msgstr "Start doc fail"

#: cmd.cpp:426
msgid "PO_GSTR_START_PAGE_FAIL"
msgstr "Start page fail"

#: cmd.cpp:435
msgid "PO_GSTR_WRITE_PRINTER_FAIL"
msgstr "Write printer fail"

#: cmd.cpp:443
msgid "PO_GSTR_END_PAGE_FAIL"
msgstr "End page fail"

#: cmd.cpp:449
msgid "PO_GSTR_END_DOC_FAIL"
msgstr "End doc fail"

#: cmd.cpp:459
msgid "PO_GSTR_WRITE_PRINTER_LESS"
msgstr "Raw data send to printer is less than request"

#: cmd.cpp:481
msgid "PO_GSTR_OPEN_USB_FAIL"
msgstr "Open usb printer fail"

#: cmd.cpp:490
msgid "PO_GSTR_WRITE_USB_FAIL"
msgstr "Write usb printer fail"

#: cmd.cpp:497
msgid "PO_GSTR_WRITE_USB_LESS"
msgstr "Raw data send to usb printer is less than request"

#: 2DBARTabDialog.h:44
msgid "PO_IDC_STATIC_2DBAR_TYPE"
msgstr "Set Type:"

#: 2DBARTabDialog.h:46 BaseTabDialog.h:62 Big5TabDialog.h:59
#: Big5TabDialog.h:60 Big5TabDialog.h:61 Big5TabDialog.h:62
#: Big5TabDialog.h:63 Big5TabDialog.h:64 BlackMarkTabDialog.h:61
#: BlackMarkTabDialog.h:62 BlackMarkTabDialog.h:63 BlackMarkTabDialog.h:64
#: HotTabDialog.h:45 NetTabDialog.h:54 NetTabDialog.h:55 NetTabDialog.h:56
#: OtherTabDialog.h:45 RppTabDialog.h:62 RppTabDialog.h:63 RppTabDialog.h:64
#: SerialTabDialog.h:50 SerialTabDialog.h:51 UDPSearchTabDialog.h:77
#: WifiTabDialog.h:54
msgid "PO_GSTR_SET"
msgstr "Set"

#: BaseTabDialog.h:51 RppTabDialog.h:47
msgid "PO_GSTR_CODE_PAGE"
msgstr "Code Page:"

#: BaseTabDialog.h:52 RppTabDialog.h:48
msgid "PO_GSTR_BAUD_RATE"
msgstr "Baud Rate:"

#: BaseTabDialog.h:53 RppTabDialog.h:49
msgid "PO_GSTR_CHARACTER"
msgstr "Character:"

#: BaseTabDialog.h:54 RppTabDialog.h:50 SerialTabDialog.h:46
msgid "PO_GSTR_CHS"
msgstr "CHS/Line:"

#: BaseTabDialog.h:55 RppTabDialog.h:52
msgid "PO_GSTR_DENSITY"
msgstr "Density:"

#: BaseTabDialog.h:56 SerialTabDialog.h:48
msgid "PO_GSTR_PARITY"
msgstr "Parity:"

#: BaseTabDialog.h:57
msgid "PO_IDC_CHECK_BASE_BUZZER"
msgstr "Buzzer"

#: BaseTabDialog.h:58
msgid "PO_IDC_CHECK_BASE_CUTTER"
msgstr "Cutter"

#: BaseTabDialog.h:59
msgid "PO_IDC_CHECK_BASE_DRAWER"
msgstr "Drawer"

#: BaseTabDialog.h:60
msgid "PO_IDC_CHECK_BASE_BUZZER_AFTER_PRINT"
msgstr "Buzzer After Print"

#: BaseTabDialog.h:61
msgid "PO_IDC_CHECK_BASE_AUTO_REPRINT"
msgstr "Auto Reprint The Last Receipt"

#: BaseTabDialog.h:63 UDPSearchTabDialog.h:79
msgid "PO_GSTR_SELF_TEST"
msgstr "Self Test"

#: Big5TabDialog.h:52
msgid "PO_IDC_STATIC_BIG5_E"
msgstr "Emualtion Mode:"

#: Big5TabDialog.h:53
msgid "PO_IDC_STATIC_BIG5_LANGUAGE"
msgstr "Language:"

#: Big5TabDialog.h:54
msgid "PO_IDC_STATIC_BIG5_SPEED"
msgstr "Speed:"

#: Big5TabDialog.h:55
msgid "PO_IDC_STATIC_BIG5_BARDCODE_WIDE"
msgstr "Barcode Wide:"

#: Big5TabDialog.h:56
msgid "PO_IDC_STATIC_BIG5_PAPER_WIDTH"
msgstr "Paper Width:"

#: Big5TabDialog.h:57
msgid "PO_IDC_STATIC_BIG5_AUTO_REPRINT"
msgstr "Auto Reprint Mode:"

#: BlackMarkTabDialog.h:52
msgid "PO_IDC_STATIC_BM_LENGHT"
msgstr "Black Mark Length:"

#: BlackMarkTabDialog.h:53
msgid "PO_IDC_STATIC_BM_WIDTH"
msgstr "Black Mark Width:"

#: BlackMarkTabDialog.h:54
msgid "PO_IDC_STATIC_BM_PRINT"
msgstr "Print After Black Mark:"

#: BlackMarkTabDialog.h:55
msgid "PO_IDC_STATIC_BM_CUT"
msgstr "Cut After Black Mark:"

#: BlackMarkTabDialog.h:56
msgid "PO_GSTR_ENABLE"
msgstr "Enable"

#: BlackMarkTabDialog.h:57
msgid "PO_GSTR_DISABLE"
msgstr "Disable"

#: BlackMarkTabDialog.h:58
msgid "PO_IDC_BUTTON_BLACK_NEXT_MARK"
msgstr "Next Black Mark"

#: BlackMarkTabDialog.h:59
msgid "PO_IDC_BUTTON_BLACK_NEXT_CUT"
msgstr "Next Cut"

#: DownloadDialog.h:48
msgid "PO_DOWNLOAD_DLG_CAPTION"
msgstr "Update"

#: DownloadDialog.h:66
msgid "PO_DOWNLOAD_DLG_PROGRAM"
msgstr "Program"

#: DownloadDialog.h:71
msgid "PO_DOWNLOAD_DLG_LOGO"
msgstr "Logo"

#: EthernetDialog.h:45
msgid "PO_IDD_DIALOG_ETHERNET"
msgstr "Ethernet"

#: EthernetDialog.h:47
msgid "PO_GSTR_OK"
msgstr "OK"

#: EthernetDialog.h:48 ParamSetDialog.h:62
msgid "PO_GSTR_CANCEL"
msgstr "Exit"

#: HotTabDialog.h:43
msgid "PO_IDC_STATIC_HEART_TIME"
msgstr "Heat Time:"

#: LogoTabDialog.h:56 ProgramTabDialog.h:48
msgid "PO_IDC_STATIC_PROGRAM_SELECT"
msgstr "Select A Printer Firmware:"

#: LogoTabDialog.h:58
msgid "PO_GSTR_ADD"
msgstr "Add"

#: LogoTabDialog.h:59
msgid "PO_GSTR_DELETE"
msgstr "Delete"

#: LogoTabDialog.h:60
msgid "PO_GSTR_DOWNLOAD"
msgstr "Update"

#: MainDlg.h:113
msgid "PO_GSTR_RONGTA_MAIN_DLG_CAPTION"
msgstr "RongtaPrinterTool"

#: MainDlg.h:115
msgid "PO_GSTR_MAIN_DLG_CAPTION"
msgstr "PrinterTool"

#: MainDlg.h:120
msgid "PO_IDC_STATIC_MAIN_GROUP"
msgstr "Communication with printer"

#: MainDlg.h:121
msgid "PO_IDC_RADIO_SELECT_PORT"
msgstr "Port:"

#: MainDlg.h:122
msgid "PO_IDC_RADIO_SELECT_DRIVER"
msgstr "Printer Driver:"

#: MainDlg.h:123
msgid "PO_IDC_BUTTON_CONFIG_PORT"
msgstr "Config Port"

#: MainDlg.h:124
msgid "PO_IDC_BUTTON_SET"
msgstr "Setting"

#: MainDlg.h:125
msgid "PO_IDC_BUTTON_DOWNLOAD"
msgstr "Update"

#: NetTabDialog.h:51
msgid "PO_IDC_STATIC_NET_PORT"
msgstr "Port:"

#: NetTabDialog.h:52
msgid "PO_IDC_STATIC_NET_DUPLEX_MODE"
msgstr "Duplex Mode:"

#: OtherTabDialog.h:43
msgid "PO_IDC_STATIC_QUEUE_NUMBER"
msgstr "Sequence Number:"

#: ParamSetDialog.h:59
msgid "PO_GSTR_PARAM_SET_DLG_CAPTION"
msgstr "Printer Info"

#: ParamSetDialog.h:61
msgid "PO_GSTR_PARAM_SET_OK"
msgstr "OK"

#: PrinterSetDialog.h:53
msgid "PO_PRINTER_SET_DLG_CAPTION"
msgstr "Setting"

#: PrinterSetDialog.h:72
msgid "PO_PRINTER_SET_DLG_BASE"
msgstr "Base"

#: PrinterSetDialog.h:77
msgid "PO_PRINTER_SET_DLG_EHTERNET"
msgstr "Ethernet"

#: PrinterSetDialog.h:81
msgid "PO_PRINTER_SET_DLG_WIFI"
msgstr "Wifi"

#: PrinterSetDialog.h:85
msgid "PO_PRINTER_SET_DLG_BM"
msgstr "BlackMark"

#: PrinterSetDialog.h:89
msgid "PO_PRINTER_SET_DLG_RPP"
msgstr "RPP"

#: PrinterSetDialog.h:93
msgid "PO_PRINTER_SET_DLG_HEART_TIME"
msgstr "Heart Time"

#: PrinterSetDialog.h:97
msgid "PO_PRINTER_SET_DLG_2D_BAR"
msgstr "2D Barcode"

#: PrinterSetDialog.h:101
msgid "PO_PRINTER_SET_DLG_SERIAL"
msgstr "Serial"

#: PrinterSetDialog.h:105
msgid "PO_PRINTER_SET_DLG_SERIAL_PRINTER"
msgstr "Search Printer"

#: PrinterSetDialog.h:109
msgid "PO_PRINTER_SET_DLG_BIG5"
msgstr "BIG5"

#: PrinterSetDialog.h:112
msgid "PO_PRINTER_SET_DLG_OTHER"
msgstr "Other"

#: ProgramTabDialog.h:50
msgid "PO_IDC_BUTTON_PROGRAM_OPEN"
msgstr "Select Firmware"

#: ProgramTabDialog.h:51
msgid "PO_IDC_BUTTON_PROGRAM_UPDATE"
msgstr "Update"

#: RppTabDialog.h:51
msgid "PO_IDC_STATIC_RPP_FONT"
msgstr "Font:"

#: RppTabDialog.h:54
msgid "PO_IDC_STATIC_RPP_IDLE_TIME"
msgstr "Idle Time:"

#: RppTabDialog.h:55
msgid "PO_IDC_STATIC_RPP_MAX_FEED"
msgstr "Max Feed:"

#: RppTabDialog.h:56
msgid "PO_IDC_STATIC_RPP_PAGE_LEN"
msgstr "Page Len:"

#: RppTabDialog.h:57
msgid "PO_IDC_STATIC_RPP_DEV_NAME"
msgstr "Device Name:"

#: RppTabDialog.h:58
msgid "PO_IDC_STATIC_RPP_PIN"
msgstr "Pin:"

#: RppTabDialog.h:59
msgid "PO_IDC_STATIC_RPP_MODEL_NAME"
msgstr "Model Name:"

#: RppTabDialog.h:60
msgid "PO_IDC_STATIC_RPP_OFF_TIME"
msgstr "Off Time:"

#: SerialTabDialog.h:45
msgid "PO_IDC_STATIC_SERIAL_NUMBER_BITS"
msgstr "Number of data bits:"

#: SerialTabDialog.h:47
msgid "PO_IDC_STATIC_SERIAL_HAND_SHAKE"
msgstr "Hand shake:"

#: UDPSearchTabDialog.h:78
msgid "PO_IDC_BUTTON_UDP_STATUS"
msgstr "Status"

#: UDPSearchTabDialog.h:80
msgid "PO_GSTR_REBOOT"
msgstr "Reboot Printer"

#: UDPSearchTabDialog.h:81
msgid "PO_GSTR_SEARCH"
msgstr "Search Printers"

#: UDPSearchTabDialog.h:83
msgid "PO_IDC_STATIC_UDP_NOTICE"
msgstr ""
"Notice: After searched printers, please select the printer before other "
"operation."

#: UDPSearchTabDialog.h:110
msgid "PO_IDC_STATIC_UDP_LOCAL_IP"
msgstr "Local IP Address: "

#: WifiTabDialog.h:45
msgid "PO_IDC_STATIC_WIFI_MODE"
msgstr "Mode:"

#: WifiTabDialog.h:46 WifiTabDialog.h:49
msgid "PO_GSTR_TYPE"
msgstr "Type:"

#: WifiTabDialog.h:47
msgid "PO_IDC_STATIC_WIFI_WPA_ENCRY"
msgstr "Encryption:"

#: WifiTabDialog.h:48
msgid "PO_IDC_STATIC_WIFI_WPA_KEY"
msgstr "PSK Key:"

#: WifiTabDialog.h:50
msgid "PO_IDC_STATIC_WIFI_WEP_KEY"
msgstr "Key:"

#: WifiTabDialog.h:52
msgid "PO_IDC_RADIO_WIFI_NONE"
msgstr "OPEN(No Keys)"

#~ msgid "PO_IDC_STATIC_SERIAL_DHCP"
#~ msgstr "DHCP:"

#~ msgid "PO_IDC_STATIC_SERIAL_512_DOTS"
#~ msgstr "512 Dots:"

#~ msgid "PO_GSTR_PRINTER_NOT_SELECT"
#~ msgstr "Please select a existent printer!"

#~ msgid "PO_GSTR_DLG_CAPTION"
#~ msgstr "Ethernet Printer Config Tool"

#~ msgid "PO_GSTR_STATIC_NOTICE"
#~ msgstr ""
#~ "Notice: After searched printers, please select the printer before other "
#~ "operation."

#~ msgid "PO_GSTR_STATIC_IP"
#~ msgstr "Local IP Address: "

#~ msgid "PO_GSTR_PRAAM_SET"
#~ msgstr "Printer Parameter Settings"

#~ msgid "PO_GSTR_PRINTER_STATUS"
#~ msgstr "Printer Status"

#~ msgid "PO_GSTR_SELFTEST"
#~ msgstr "Printer Self Test Page"

#~ msgid "PO_GSTR_DUPLEX_AUTO"
#~ msgstr "Auto Detect"

#~ msgid "PO_GSTR_10M_HALF"
#~ msgstr "10Mbps Half Duplex"

#~ msgid "PO_GSTR_100M_HALF"
#~ msgstr "100Mbps Half Duplex"

#~ msgid "PO_GSTR_10M_FULL"
#~ msgstr "10Mbps Full Duplex"

#~ msgid "PO_GSTR_100M_FULL"
#~ msgstr "100Mbps Full Duplex"

#~ msgid "PO_GSTR_INSTALL_DRIVER_ERROR"
#~ msgstr "Driver install fail"

#~ msgid "PO_GSTR_ADD_PRINTER_ERROR"
#~ msgstr "Printer add fail"

#~ msgid "PO_GSTR_INSTALL_SUCCESS"
#~ msgstr "Install Success"

#~ msgid "PO_GSTR_OPEN_COM_ERROR"
#~ msgstr "Cann't open com"

#~ msgid "PO_GSTR_OPEN_LPT_ERROR"
#~ msgstr "Open LPT port fail"

#~ msgid "PO_GSTR_GET_LPT_CONFIG_ERROR"
#~ msgstr "Get LPT configure fail"

#~ msgid "PO_GSTR_DRIVER_PORT_ERROR"
#~ msgstr "Please select port for printer"

#~ msgid "PO_GSTR_DRIVER_NAME_ERROR"
#~ msgstr "Please input printer name"

#~ msgid "PO_GSTR_OS_TYPE"
#~ msgstr "OS Type:"

#~ msgid "PO_GSTR_PRINTER_TYPE"
#~ msgstr "Printer Type"

#~ msgid "PO_GSTR_POS"
#~ msgstr "POS Printer"

#~ msgid "PO_GSTR_LAPTOP"
#~ msgstr "Laptop Printer"

#~ msgid "PO_GSTR_MICRO_PRINTER"
#~ msgstr "Micro Printer"

#~ msgid "PO_GSTR_PIN_PRINTER"
#~ msgstr "Pin Printer"

#~ msgid "PO_GSTR_PRINTER_DETAIL"
#~ msgstr "Printer Type"

#~ msgid "PO_GSTR_PRINTER_PORT"
#~ msgstr "Printer Port"

#~ msgid "PO_GSTR_PT_CONFIG_NAME"
#~ msgstr "Printer Name:"

#~ msgid "PO_GSTR_PT_CONFIG_PORT"
#~ msgstr "Config Port"

#~ msgid "PO_GSTR_PORT_STATIC"
#~ msgstr "Port:"
